Earthmoving, Compaction, Materials handling and Transport
Machinery for Mining and Construction Special Works
Plants and Machinery for the Production of Construction Materials
Light and Auxiliary Equipment
Lifting Equipment for Persons and Loads
Auxiliary Equipment and Elements
Components, Spare Parts and Accessories
Comansa will present new models and technologies for the Northern American market at the ConEXPO
Members news
19 Feb 2020
Additions to the range, the CUBE cab and a new machine setting up system
Comansa will again be taking part in the ConExpo-Con/Agg trade show in Las Vegas, United States, which will be held from 10 to 14 March 2020. The tower crane manufacturer's stand will be number F5803, in the Festival Grounds outdoors area, at Las Vegas Convention Center.
The trade show, which is held every 3 years, is one of the most important in the construction sector worldwide and this year will feature 2,800 exhibitors and cover an area of more than 230,000 square meters. It is a very well attended event that brings together leading international manufacturers, professionals, distributors and engineers.
Those visiting the Comansa stand will be able to find out about the LCL310 luffing-jib crane, specifically its 18-tonne maximum load version, which will be exhibited during the show. Its maximum jib length is 60 metres, and the different configurations allow for maximum jib steps every 5m. This luffing-jib crane, with its compact design and reduced out of service radius, is ideal for use in cities or congested building sites.
During the trade show, at its stand Comansa will also exhibit the CUBE cab, winner of the prestigious iF prize in 2018 and that comes as standard in most of Comansa's cranes. It combines a new design, comfort and maximum productivity, as well as innovative advantages in terms of ergonomics and features.
Comansa will also promote the latest versions of its cranes developed over the last year, especially its new 21LC1050 and 21LC1400 models, with maximum load capacities of up to 50 and 66 tonnes respectively, which will improve productivity and enhance options in a market that is focussed on large flat-top tower cranes.
Similarly, the new Quick Set system will be introduced. This is a new technology designed to simplify the commissioning of cranes. With Quick Set, the set up and calibration times have been significantly reduced using a system that leads to easier, safer and more intuitive adjustments, achieving faster and less labour-intensive calibration. This smart development is the result of so much experience gained over the years and is readily available across the entire 21LC range and, during 2020, it will be expanded to the 11LC and 16LC ranges.
This new edition in 2020 will be the sixth consecutive time that Comansa has exhibited at ConExpo. Comansa has local presence since 2002, providing sales, after-sales, engineering and training services in Northern America. Its American Headquarter is located in Pineville, near Charlotte, North Carolina, where it also has a large warehouse to house components and spare parts, as well as technical training rooms for better customer service, and has subsidiaries in Washington and Texas.
More information about COMANSA at www.comansa.com
The trade show, which is held every 3 years, is one of the most important in the construction sector worldwide and this year will feature 2,800 exhibitors and cover an area of more than 230,000 square meters. It is a very well attended event that brings together leading international manufacturers, professionals, distributors and engineers.
Those visiting the Comansa stand will be able to find out about the LCL310 luffing-jib crane, specifically its 18-tonne maximum load version, which will be exhibited during the show. Its maximum jib length is 60 metres, and the different configurations allow for maximum jib steps every 5m. This luffing-jib crane, with its compact design and reduced out of service radius, is ideal for use in cities or congested building sites.
During the trade show, at its stand Comansa will also exhibit the CUBE cab, winner of the prestigious iF prize in 2018 and that comes as standard in most of Comansa's cranes. It combines a new design, comfort and maximum productivity, as well as innovative advantages in terms of ergonomics and features.
Comansa will also promote the latest versions of its cranes developed over the last year, especially its new 21LC1050 and 21LC1400 models, with maximum load capacities of up to 50 and 66 tonnes respectively, which will improve productivity and enhance options in a market that is focussed on large flat-top tower cranes.
Similarly, the new Quick Set system will be introduced. This is a new technology designed to simplify the commissioning of cranes. With Quick Set, the set up and calibration times have been significantly reduced using a system that leads to easier, safer and more intuitive adjustments, achieving faster and less labour-intensive calibration. This smart development is the result of so much experience gained over the years and is readily available across the entire 21LC range and, during 2020, it will be expanded to the 11LC and 16LC ranges.
This new edition in 2020 will be the sixth consecutive time that Comansa has exhibited at ConExpo. Comansa has local presence since 2002, providing sales, after-sales, engineering and training services in Northern America. Its American Headquarter is located in Pineville, near Charlotte, North Carolina, where it also has a large warehouse to house components and spare parts, as well as technical training rooms for better customer service, and has subsidiaries in Washington and Texas.
 |
The LCL310 luffing-jib crane in its 18-tonne version and up to 60m jib. |
 |
Detail of the LCL310 model that will be exhibited at the stand |
 |
CUBE Cabin |
More information about COMANSA at www.comansa.com
Thank you
We have sent you an email to verify your account
There was an error on the process